Fall Sourdough Recipes (2024)

FAQs

How quickly should a sourdough starter rise and fall? ›

When your starter is reliably rising to double or triple its size and falling in the jar anywhere between 4-8 hours after you feed it (dependent on your ambient conditions and the flour you feed with) it is ready to bake with. When the starter is at the peak of its rise, it is called ripe, fed, or mature.

This rise is expected and is a good indicator of strong fermentation activity. However, depending on the type of flour you are using to feed your starter, it may not rise all that high and fall all that far—and that's okay.

The secret to sourdough is simple: water. The more water you add to your dough will affect how open the crumb (bigger holes and softer texture) will be once it's baked.

Past-Peak and Falling: If your starter/leaven is past-peak and is beginning to fall in height, it is beyond the optimal point to use it for baking, but it will still work. The only thing to consider is that once a starter peaks, it starts to become more acidic as it falls.

Keep feeding your starter, and you'll see normal activity (bubbles) return in a few days. If your starter has a bit of dark liquid on top, it's not dead! It simply means it's hungry and that it's time to feed it. Unless your starter has a pink or orange hue or is beginning to mold, you probably haven't killed it yet.

stir your starter in between feedings - try stirring it twice in between feedings and really give it a chance to get oxygen into the mix. This will help to activate your starter without too much effort.

If you don't want to put the dough in the fridge for a cold ferment, you can leave it to proof on the counter for a little while. You do need to be careful not to let it over ferment. Ideally, you want the temperature to be on the cooler side (no more than 21C / 69.8F). Let the dough relax into the banneton.

With the “poke test” you put some flour on your finger and poke the dough. If it springs back immediately, it needs more time. If it slowly springs back about halfway it is ready to bake. If it does not spring back it is overproofing and should be bake right away.

Note: As loaves begin to overproof they lose their height and shape. The crumb becomes more dense. The holes become more ragged and irregular in shape. The crust begins to thin and separate from the crumb.

What is the secret to fluffy sourdough? ›

Keeping the lid on for the first part of baking allows steam to expand between the gluten fibers to rise the bread and create a fluffy loaf. Step 4: Remove the lid and bake for an additional 12-14 minutes or until the crust is crispy and golden brown. Once you take the lid off, the bread likely won't rise anymore.

The best flour blend for creating a new sourdough starter is 50% whole-meal flour (whole wheat or whole rye) and 50% bread flour or all-purpose flour. I recommend a 50/50 mix of whole wheat flour and bread flour. Why do you need to use these two types of flour?

If you don't get rid of the excess, eventually you'll have more starter than your feedings can sustain. After a few days, your daily 1/4 cup flour and water won't be enough to sustain your entire jar of starter, and your starter will be slow and sluggish, not much better than discard itself.

With each sourdough starter feeding, you'll be discarding some to avoid it from becoming overly acidic. Most will compost or trash this discard, but you can save it and use it in other recipes!

Sourdough starter goes flat when it's been left too long for that temperature and it runs out of food. The starter fills with air, was not used in time, runs out of energy, and deflates. Deflation destroys the airy structure of the sourdough starter.

Try reducing the water in your next feeding and see if you have different results. Also, the type of flour you are using can impede the rise of your starter. All-Purpose flour, for example, will not rise as robustly as a blend of bread flour and whole wheat flour.

Let your starter rise at room temperature, ideally 75+ F (the warmer it is, the faster it will rise), until bubbly, active and double in size (2-12 hrs). When your starter is at peak height, it's ready to use. Eventually it will fall back down, and become inactive again. Then, you'll need to repeat the feeding process.

Often, the starter will double in size in 12 hours or less. Sometimes it takes 24 hours. If you get good bubbling and the starter doesn't double, that's OK.